Autopage C3-RS-625 Operation Manual page 10

Start Mode
Your vehicle is running
Remote Transmission
You are transmitting the
signal to control unit
Trunk Release Trunk
open. Trunk symbol only.
Vibration Mode
Remote Control vibrates
when the system is
triggered
Power Save Mode
Save the battery power
** Press the valet switch in the vehicle with the Ignition OFF to page
the driver carrying the XT-43 two-way remote control.
PROGRAM MODE FOR LCD REMOTE CONTROL TRANSCEIVER:
Press and hold all four remote control buttons simultaneously unit
one long beep is heard. LCD Programming has now been entered.
Transceiver Button
Program Mode -
Program Mode -
Program Mode -
- +
1. Second Vehicle Security Operation: Your remote transmitter can be
utilized to control a second vehicle's Auto Page security system. To
System Function
Switching code for 2nd / 1st
Car Operation
Melody / Vibration Mode
Power Save Mode
LCD screen lamp turns on for
5 seconds.
Clear the Flash Icon and
Melody Sound
10
Valet Mode
All the function shall be
temporarily on hold.
In – Range Indicator
You are within the remote
control range.
Low Battery
You have to replace the
battery of remote control.
Ignition On
Driver paging
Someone is paging you in
front of your vehicle. **
Remark
Press within 5
seconds
Press within 5
seconds
Press within 5
seconds
Press within 3
seconds