Notes On Use; Ordering Information - Fujitsu MB3788 Datasheet

NOTES ON USE

• Take account of common impedance when designing the earth line on a printed wiring board.
• Take measures against static electricity.
- For semiconductors, use antistatic or conductive containers.
- When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
- The work table, tools and measuring instruments must be grounded.
- The worker must put on a grounding device containing 250 k
• Do not apply a negative voltage
- Applying a negative voltage of 0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.

ORDERING INFORMATION

Part number
MB3788PFV
to 1 M resistors in series.
Package
24-pin Plastic SSOP
(FPT-24P-M03)
MB3788
Remarks
19