Notes On Use; Help - Brother BES-1240BC Instruction Manual

Chapter 1 An Introduction of Embroidery Machine
Relationship among Programs
When the software is started, the program (1) for actuating the machine starts first.
Next, embroidery data is called by the program (2). Use the program (3), when
required, for editing and embroidering. The embroidery data is totaled by the
program (4).
The programs (2), (3), and (4) can be started from the menu of the program (1).
Each program can also be started independently.
• Do not start other application software while the machine controller is used.
• Do not set the screen saver.
• Set the computer not to use the system agent included in the Windows 95 PLUS.
The software is equipped with an on-line help function as an accessory.
Click
meaning and usage of the item. Pressing the [F1] key brings up the help screen of
the application for your reference.
18
(1)
Machine
Controller

2-3 Notes on use

To cancel setting, select the "Screen saver" on the "Control panel" screen and
set "Not used".

2-4 Help

, then the icon of the desired item. A message is displayed to explain the
BES-940BC • BES-1240BC
(2)
Embroidery
Data Explorer
Effective only when this is
independently started
(3)
Embroidery
Data Editor
(4)
Production
report