Edit A Number/Name Stored In Memory; Delete A Number/Name Stored In The Directory - VTech Cordless Telephone Manual

Telephone Directory
to change the setting. Choose Y (Yes) if you wish the phone to
7 Press or
alert you to calls from this number by changing to a distinctive ringing pattern
after the first ring. Choose N (No) for a normal ringing pattern.
Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in
8
D
Step 7,a will be displayed with the directory entry.
Note: When memory is full the screen displays MEMORY FULL, an error tone
sounds, and you will not be able to store a new number until you delete a stored
number.
Edit a Number/Name Stored in the Directory
). The screen displays DIRECTORY.
1 Press (
2 Press or to scroll alphabetically through entries stored in memory
— OR —
Press the dial pad key for the first letter of the entry you want to edit.
When the screen displays the number you want to edit, press SELECT.
3
until EDIT flashes.
Then press
DIAL ERASE
EDIT
9735550123
Press SELECT. The screen displays the name and number. The flashing cursor
4
appears at the end of the name. Use
Press SELECT to move on to edit the number.Use
corrections. Press SELECT to move to edit the Distinctive Ring setting.
Press SELECT to save the edited information.
5

Delete a Number/Name Stored in the Directory

). The screen displays DIRECTORY.
1 Press (
2 Press or to scroll alphabetically through entries stored in memory
— OR —
Press the dial pad key for the first letter of the entry you want to delete.
When the screen displays the number you want to delete, press SELECT.
3
until ERASE flashes.
Then press
DIAL EDIT
ERASE
9735550123
Press SELECT. The screen displays ERASE NO YES and the number.
4
The current choice flashes.
until YES flashes.
5 Press
Press SELECT. You'll hear a long beep confirming the deletion.
6
, and the dial pad keys to edit the name.
to backspace and make
17