Edit A Number/Name Stored In Memory; Delete A Number/Name Stored In Memory - VTech Cordless Telephone Manual

Telephone Memory
When you finish entering the name, press SELECT or PROG/CHAN. The
5
screen displays ENTER
6 Enter the telephone number. Use
REDIAL/PAUSE to store a pause in the dialing sequence.
— OR —
Press REDIAL/PAUSE to display the last number dialed from this phone.
Press SELECT or PROG/CHAN to store your entry. The screen displays
7
DISTINCT RING? and the current setting.
to change the setting. Choose Y (for Yes) if you wish the phone
8 Press or
to alert you to calls from this number by changing to a distinctive ringing
pattern after the first ring. Choose N (for No) for a normal ringing pattern.
Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in
9
D D D D D
Step 8,a will be displayed with the directory entry.

Edit a Number/Name Stored in Memory

Press MEM . The screen displays ENTER
1
2 Press the memory location key of the entry you wish to edit.
When the screen displays the number you want to edit, press SELECT.
3
until EDIT flashes.
Then press
DIAL ERASE
EDIT
9735550123
Press SELECT. The screen displays the name and number. The flashing
4
cursor appears at the end of the name. Use
edit the name. Press SELECT to move on to edit the number. Use
backspace and make corrections. Press SELECT to move on to edit the
Distinctive Ring setting.
Press SELECT to save the edited information.
5

Delete a Number/Name Stored in Memory

Press MEM . The screen displays ENTER
1
2 Press the memory location key of the entry you wish to delete.
When the screen displays the number you want to delete, press SELECT.
3
until ERASE flashes.
Then press
DIAL EDIT
ERASE
9735550123
Press SELECT. The screen displays ERASE NO YES and the number.
4
The current choice flashes.
until YES flashes.
5 Press
Press SELECT. You will hear a beep confirming the deletion.
6
NUMBER.
to backspace and make a correction. Press
0-9.
,
0-9.
14
and the dial pad keys to
to