Edit A Number/Name Stored In Memory; Delete A Number/Name Stored In Memory - VTech Cordless Telephone Manual

Telephone Memory
5 When you finish entering the name, press SELECT or PROG/CHAN. The
screen displays
6 Enter the telephone number. Use
REDIAL/PAUSE to store a pause in the dialing sequence.
— OR —
Press REDIAL/PAUSE to display the last number dialed from this phone.
7 Press SELECT or PROG/CHAN to store your entry. The screen displays
8 Press or to change the setting. Choose
to alert you to calls from this number by changing to a distinctive ringing
pattern after the first ring. Choose
9 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in
D
Step 8,a will be displayed with the directory entry.

Edit a Number/Name Stored in Memory

1 Press MEM . The screen displays
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to edit, press SELECT .
Then press until
EDIT
4 Press SELECT . The screen displays the name and number. The flashing
cursor appears at the end of the name. Use
edit the name. Press SELECT to move on to edit the number. Use
backspace and make corrections. Press SELECT to move on to edit the
Distinctive Ring setting.
Press SELECT to save the edited information.
5

Delete a Number/Name Stored in Memory

1 Press MEM . The screen displays
2 Press the memory location key of the entry you wish to delete.
3 When the screen displays the number you want to delete, press SELECT .
Then press until
ERASE
4 Press SELECT . The screen displays
The current choice flashes.
5 Press until
6 Press SELECT . You will hear a beep confirming the deletion.
.
to backspace and make a correction. Press
and the current setting.
(for No) for a normal ringing pattern.
flashes.
flashes.
flashes.
14
(for Yes) if you wish the phone
.
, and the dial pad keys to
.
and the number.
to