Edit A Number/Name Stored In Memory - VTech vt2468 User Manual

5
When you finish entering the name, press
PGOG/CHAN.
6
Enter the telephone number. Use
a correction. Press r to store a pause in the dialing sequence.
—OR—
REDIAL/PAUSE
Press
SELECT
7
Press
displays
8
Press or
wish the phone to alert you to calls from this number by changing to
a distinctive ringing pattern after the first ring. Choose
for a normal ringing pattern.
SELECT
9
Press
chose in Step 8,a Dwill be displayed with the directory entry.
Note: When memory is full the screen displays
tone sounds, and you will not be able to store a new number until you
delete a stored number.

Edit a Number/Name Stored in Memory

MEM
1
Press
2
Press the memory location key of the entry you wish to edit.
3
When the screen displays the number you want to edit, press
SELECT . Then press
EDIT
SELECT
4
Press
flashing cursor appears at the end of the name. Use
the dial pad keys to edit the name. Press
the number. Press
setting.
5 SELECT
Press
The screen displays
to display the last number dialed from this phone.
PROG/CHAN
or
to change the setting. Choose
PROG/CHAN
or
. The screen displays
or
. The screen displays the name and number. The
SELECT
to save the edited information.
TELEPHONE MEMORY
SELECT
to backspace and make
to store your entry. The screen
and the current setting.
to confirm your selection. If you
until flashes.
SELECT
to move on to edit the Distinctive Ring
13
or
.
(for Yes) if you
(for No)
, an error
.
, and
to move on to edit