Areas Of Use; Starting And Operation - Mountfield 4135H Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

5.4.8 Clutch release lever
A lever for disengaging the variable transmission.
HST is equipped with a lever, connected to the rear
axle. See (16:N).
4WD is equipped with two levers, connected to the
rear axle (17:O) and the front axle (17:P).
The disengagement lever must never be
between the outer and inner positions.
This overheats and damages the trans-
mission.
The levers enable the machine to be moved by
hand without the help of the engine. Two positions:
1. Lever in the inner position –
transmission engaged for normal
operation.
2. Lever in the outer position –
transmission disengaged. The
machine can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission could be dam-
aged.
The machine must not be operated with
the forward most lever in the outer po-
sition. Risk of damage and oil leakage in
the front axle.
5.4.9 Seat (14:I)
The seat can be folded and is adjustable
front-rear. The seat is locked in the folded
up position using the catch (14:K) and ad-
justed front-rear using the knobs (14:J).
The seat is equipped with a safety switch that is
connected to the machine's safety system. This
means that certain dangerous activities are not pos-
sible when there is nobody in the seat.
5.4.10 Engine casing (15:L)
To access the fuel cock, battery and engine
the engine is equipped with engine casing
that can be opened. The engine casing is
locked by a rubber strap.
The engine casing is opened as follows:
1. Detach the rubber strap (15:M) at the front edge
of the engine casing.
2. Carefully lift the engine casing back.
Close in reverse order.
The machine may not be operated un-
less the engine casing is folded down
and locked. Risk of burns and crushing
injuries.
ENGLISH

6 AREAS OF USE

The machine may only be used for the following
tasks using the genuine GGP accessories stated.
Operation
Mowing
Snow clearance
Grass clipping and
leaf collection
Grass and leaf
transport
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! Before using a trailer – contact your insur-
ance company.
NOTE! This machine is not intended to be driven
on public roads.

7 STARTING AND OPERATION

The machine may not be operated un-
less the engine casing is closed and
locked. Risk of burns and crushing in-
juries.
7.1 Filling with petrol (18:Q)
Always use lead-free petrol. You must never use 2-
stroke petrol mixed with oil.
The tank holds 6 litres. The level can easily be read
through the transparent tank.
NOTE! Ordinary lead-free petrol is a perishable
and must not be stored for more than 30 days.
Environmental petrol can be used, i.e. alkylate
petrol. This type of petrol has a composition that is
less harmful for people and nature.
Petrol is highly inflammable. Always
store fuel in containers that are made
especially for this purpose.
Only fill or top up with petrol outdoors,
and never smoke when filling or top-
ping up. Fill up with fuel before starting
the engine. Never remove the filler cap
or fill with petrol while the engine is
running or still warm.
EN
Accessories, GGP original
With cutting deck 95 C (all).
With cutting deck 105 C (only
4155 H).
With snow blade. Snow chains
and frame weights recommend-
ed.
With towed collector 30" or 42".
With dump cart Pro or Combi.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

4155h 4wd4155h

Table of Contents