Output Tray Settings - Ricoh Aficio MP C3500 EFI General Settings Manual

System Settings
❖ Output: Printer (printer)
Specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
• Internal Tray 1
• Internal Tray 2
• Finisher Upper Tray
2
• Finisher Shift Tray
❖ System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
• On: 60 second(s)
• Off
By selecting [On], you can specify a display time between 10 and 999 seconds.
❖ Key Repeat
You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
• Off
• Normal
• Repeat Time: Medium
• Repeat Time: Long
Note
❒ If the Panel Tone setting is [Off], the beeper does not sound, whatever the
Warm Up Notice setting.
❒ The Function Reset Timer setting is ignored if Interleave is set for Print Priority.
Reference
p.3 "Accessing User Tools"
"Function Compatibility", Copy/Document Server Reference

Output tray settings

Important
❒ You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒ When the 1000-sheet finisher, 3000-sheet finisher, or booklet finisher is in-
stalled and Staple or Shift Sort is specified for a job, the job will be delivered
to the finisher shift tray regardless of the output tray specified.
50