Lexmark M410 - Optra B/W Laser Printer Service Manual page 93

4045-XXX
Flash Test
This test causes the file system to write and read data on the flash to
test the flash.
WARNING: This test destroys all data on the flash because the
flash is reformatted at the end of the test.
To run the Flash Test:
1. Select Flash Test from the Device Tests menu.
– The power indicator blinks while the test is running.
– "Flash Test/Test Passed" message displays if the test passes
and the power indicator turns on solid.
– "Flash Test/Test Failed" message displays if the test fails and
the power indicator turns on solid.
Press Go or Return/Stop to return to the Device Tests menu.
Diagnostic Aids
3-19