Lexmark M410 - Optra B/W Laser Printer Service Manual page 34

4045-XXX
User Status Message
Programming Disk
(Do Not Power Off)
Menus Disabled
Activating Menu
Changes
2-8
Service Manual
Status
The disk is being
programmed, which
means fonts or macros
are being written to disk.
The printer menus have
been disabled. This
occurs when Menu> or
<Menu is pressed while
the printer is Ready and
Menu Lockout is active.
The printer display
shows this message for
one second and then
returns to the Ready
message.
The printer is reset to
activate a printer setting
changed in the menus.
Action
No button actions are
possible while this
message is displayed.
Note: If information is
written to flash
memory and to disk at
the same time, the
Program Flash
message is displayed.
No button actions are
possible while this
message is displayed.
No button actions are
possible while this
message is displayed.