Lexmark M410 - Optra B/W Laser Printer Service Manual page 36

4045-XXX
User Error Message
39 Complex Page
51 Defective Flash
52 Flash Full
53 Unformatted Flash
54 Network Software
Error
56 Parallel Port Disabled
61 Defective Disk
2-10
Service Manual
Explanation
This message is displayed when the page is too
complex to print.
This message is displayed when the printer
detects a defective flash. This error may occur at
power on, or during flash format and write
operations. Press Go to clear the message. The
flash is marked as bad and normal operation
continues. Flash operations are not allowed until
the problem is resolved.
This message is displayed when there is not
enough free space in the flash memory to hold
the resources that have been requested to be
written to flash.
This message is displayed when the printer
detects an unformatted flash at power on. Press
Go to clear the message. The flash is marked as
bad and normal operation continues. Flash
operations are not allowed until the flash is
formatted.
This error is displayed when the connection to the
network port is lost during power on. Press Go to
clear the message. The printer clears the setting,
but no communication can exist with the network
until the network software is reloaded.
This error is displayed when data is sent to the
printer across the parallel port, but the parallel
port has been disabled. Once this message is
displayed, reporting of further errors is
suppressed until the menus are entered, or the
printer is reset.
This error code is displayed when the printer
detects a defective disk. This error may occur at
power on or during disk format and write
operations. The following actions may be taken
while this message is displayed: Press Go to
clear the message. The disk is marked defective
and normal printer operations continue. Disk
operations are not allowed with a defective disk.
The Format Disk menu is not shown.