Lexmark M410 - Optra B/W Laser Printer Service Manual page 67

4045-XXX
Print Quality - Evenly spaced horizontal lines or marks
FRU
1 Lines spaced 2.2 mm (.08
inch) apart
2 Lines spaced 211.5 mm
(8.33 inches) apart
Lines spaced 141 mm (5.56
inches) apart
3 Lines spaced 15.6 mm
(0.61 inch) apart
4 Lines spaced 47 mm
(1.85 inch) apart
5 Lines spaced 38.0 mm
(1.50 inches) apart
Lines spaced 46.5 mm
(1.83 inches) apart
6 Lines spaced 80.0 mm
(3.14 inches) apart
7 Lines spaced 77 mm
(3.03 inches) apart
8 Lines spaced 52 mm
(2.06 inches) apart
Action
This can be caused by the motor
pinion gear on the main drive motor.
Replace the main drive assembly.
This can be caused by a defective
gear in the main drive assembly.
Replace the main drive gearbox
assembly.
Replace the FRUs in the following
order:
developer drive assembly
main drive assembly
Replace the FRUs in the following
order:
toner cartridge
charge roll
main drive assembly
This can be caused by a defective
gear in the developer drive
assembly. Replace the developer
drive assembly.
Replace the hot roll.
Replace the backup roll
Replace the transfer roll.
Diagnostic Information
2-41