Job Prints From The Wrong Tray Or On The Wrong Paper - Lexmark M1140 User Manual

Troubleshooting
Action
Step 3
Change the environmental settings.
From the printer control panel, navigate to:
> Settings >
a setting >
Note: When using the Eco-Mode setting, you may notice a reduction in
performance.
Does the print job still take long?

Job prints from the wrong tray or on the wrong paper

Action
Step 1
a
Check if you are printing on paper that is supported by the tray.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
Step 2
a
From the Paper menu on the printer control panel, set the paper size
and type to match the paper loaded in the tray.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
Step 3
a
Depending on your operating system, open Printing Preferences or
the Print dialog, and then specify the paper type.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
Step 4
a
Check if the trays are not linked.
b
Resend the print job.
Did the job print from the correct tray or on the correct paper?
> General Settings >
Yes
Install additional
printer memory.
For more information,
contact
support.
> Eco‑Mode > select
Yes
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
The problem is solved. Go to step 4.
The problem is solved. Contact
No
The problem is solved.
customer
No
support.
128
customer