Troubleshooting; Understanding The Printer Messages - Lexmark M1140 User Manual

Troubleshooting

Troubleshooting

Understanding the printer messages

Bin full. Remove paper.
Remove the paper stack from the standard bin.
Cannot collate large document [37]
Try one or more of the following:
•
From the printer control panel, press
of the print job.
•
Cancel the current print job.
Cannot defrag flash memory [37]
Try one or more of the following:
•
From the printer control panel, press
•
Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to:
> Settings >
•
Install additional printer memory.
Cartridge, imaging unit mismatch [41.xy]
1
Check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR
supplies.
Note: For a list of supported supplies, see the "Ordering supplies" section of the User's Guide or visit
www.lexmark.com.
2
Change the toner cartridge or imaging unit so that both are MICR or non‑MICR supplies.
Notes:
• Use a MICR toner cartridge and imaging unit for printing checks and other similar documents.
•
Use a non-MICR toner cartridge and imaging unit for regular print jobs.
Cartridge nearly low [88.xy]
If necessary, press
to print the portion of the job already stored and begin collating the rest
to stop the defragmentation and continue printing.
> Print Settings >
on the printer control panel to clear the message and continue printing.
> Utilities Menu > > Format Flash > > Yes >
111