Table of Contents
Advertisement
DOUBLE INSULATION
Double insulation is a concept in safety in electric power tools, which
eliminates the need for the standard 3-wire grounded power cord. All
exposed metal parts are isolated from the internal motor components with
protecting insulation. Double insulated tools do not need to be grounded.
The following recommended accessories are currently available at your local
Sears Store.
EXTENSION
CORDS
Sears offers a large selection
of extension cords that help extend your working
range. The use of any extension cord will cause some loss of power. To keep
the loss at a minimum and to prevent overheating,
use an extension cord that
is heavy enough to carry the current
that the tool will draw.
A wire gauge (AWG) of at least 14 is recommended
for an extension cord 25
feet or less in length. When working outdoors ALWAYS
use an extension cord
that is suitable for outdoor use. The cord's jacket will be marked
WA.
I /K CAUTION:
Keep extension
cords away from the cutting
area,
and position
the cord so it will not get caught
on lumber, tools, etc.
during the cutting operation.
I
_ WARNING:
Check extension
cords before each use. If damaged,
replace
it immediately.
NEVER
use a tool wff.h a damaged
cord because
touching
the damaged
area could cause electrical
shock, resulting
in
senous
injury.
Sears offers a large selection
of extension cords that help extend your
working range.
The following
recommended
accessories are
currently
available at
your local
Sears Store.
7 1/4-in. 40-Tooth General-Purpose Cut-Off Blade
7 1/4-in. 35-Tooth Master Combination Blade
7 1/4-in. 200-Tooth Plywood Blade
7 1/4-in, 18-Tooth Carbide Blade
7 114-1n. 1 S-Tooth Mach II Silver Series Carbide Blade
7 1/4-in. 24-Tooth Mach II Silver Series Carbide Blade
7 l/4-in. 24-'rooth Combination Carbide Blade
Rip / Edge Guide
I Z_ WARNING:
The use of attachments
or accessories
that are
not recommended
might be dangerous
and could result in serious
injury.
24
Advertisement
Table of Contents
