Download Print this page

Craftsman 172.10853 Owner's Manual page 22

7 1/4-in. circular saw
Hide thumbs

Advertisement

MAKING RIPCUTS cont.
Using The Rip/Edge Guide (sold separately)
To Attach the Rip/Edge Guide
1. Unplugthe saw,
I Z_ WARNING:
NEVER Failure to unplug the saw could result in
accidental starting causing possible serious personal injury.
2. Place edge guide through holes in
the shoe of the saw (See Fig, 18).
3. Adjust edge guide to the
desired length of cut.
4. Tighten the knob that holds
the edge guide securely.
I
Using the Rip/Edge
Guide
1. Place the face of the edge guide firmly., against
the edge of the
workpiece
(See Fig. 18). Doing this will give you a straight
cut without
pinching
the blade.
2. BE SURE that the guiding
edge of the workpiece
that the
edge guide is riding on is straight
so you get a straight
cut.
3. DO NOT bind the blade in the cut.
22

Advertisement

loading

  Related Manuals for Craftsman 172.10853