Craftsman NEXTEC 320.61189 Operator's Manual page 13

WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
VARIABLE SPEED
The variable-speed trigger switch delivers higher speed with increased pressure
and lower speed with decreased trigger pressure.
FORWARD/REVERSE/CENTER LOCK
The direction-of-rotation selector located above the trigger switch changes the
direction of bit rotation. Setting the trigger switch in the OFF (center lock) posi-
tion helps to reduce the possibility of accidental starting.
LED WORK LIGHT
Pressing the trigger switch illuminates the LED worklight, located on the front of
the Impact Driver. This feature provides extra light for increased visibility.
WARNING: If any part is broken or missing, do not attempt to plug in the
power cord or operate the Impact Driver until the broken or missing part is
replaced. Failure to do so could result in possible serious injury.
,_ WARNING: Do not attempt to modify this Impact Driver or create accessories
not recommended for use with this Impact Driver. Any such alteration or modification
is misuse and could result in a hazardous condition leading to possible serious injury.
_, WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the Driver when assembling parts.
UNPACKING
This product has been shipped completely assembled.
= Carefully remove the tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
= Inspect the tool carefully to make sure no breakage or damage occurred dur-
ing shipping.
= Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
= If any parts are damaged or missing, please refer to the numbers listed on
the back page of operator's manual.
PACKING LIST
1/4-in. impact driver, operator's manual
61589 Manual_Revised_09 0306 Page 13