Bri Switched Line - Enterasys X-Pedition XSR-3020 Getting Started Manual

Enterasys networks security router getting started guide
Hide thumbs Also See for X-Pedition XSR-3020:
Table of Contents

Advertisement

Configuring the WAN Ports
3.
Enter
4.
Enter
Management Interface type.
5.
Enter interface
select the BRI port, channel, and sub-interface.
6.
Enter
7.
Enter
mode and assign a data-link connection identifier to the Frame Relay sub-interface.
8.
Enter

BRI Switched Line

1.
Enter
2.
Enter
basic-ntt>
3.
Enter
telephone numbers.
4.
Enter
5.
Enter
6.
Enter
priority to this BRI interface. You can add additional dial pools as needed.
7.
Enter
8.
Enter
9.
Enter
10. Enter
11. Enter
number and associated Map Class.
12. Enter any additional dialer strings as instructed above.
13. Enter
physical interface.
14. Enter
15. Enter
Remember to save your configuration after all edits.
3-10 Software Configuration
no shutdown
to keep the BRI interface enabled.
frame-relay lmi-type <ilmi | ansi | q933a | auto | none>
bri 0:<1 | 2>.<1-30> multi-point
ip address <xxx.xxx.xxx.xxx>/24
frame-relay interface-dlci <16-1007>
no shutdown
to keep the BRI sub-interface enabled.
interface bri 0
to acquire Interface mode and select the BRI port.
isdn switch-type <basic-5ess | basic-dms100 | basic-net3 | basic-ni1 |
to select the Central Office switch type for the ISDN port.
isdn spid1 <SPID><LDR>
isdn spid2 <SPID><LDR>
no shutdown
to keep the BRI interface enabled.
dialer pool-member <1-255> priority <0-255>
exit
to quit BRI Interface mode.
interface dialer <0-255>
ip address <xxx.xxx.xxx.xxx/24
encapsulation ppp
to select PPP encoding.
dialer string <phone number> class <Map Class name>
dialer pool <1-255>
show interface
to verify your ISDN and dialer configuration.
no shutdown
to keep the Dialer interface enabled.
to set an IP address for the BRI interface.
to acquire Frame Relay DLCI Interface
for the SPID (ISDN service) and LDR (local directory)
for a second SPID as needed.
to acquire Interface mode and select the Dialer port.
to set an IP address for the Dialer port.
to create a dial pool from which the dialer interface will select a
to select the Local
to acquire BRI Sub-interface mode and
to add a dialer pool and associated
to specify the destination

Advertisement

Table of Contents
loading

Table of Contents