OPERATOR,s MANUAL Model Number: Please indicate the following information from the service Part drawing provided. Model Description: *Product You Purchased may vary from Picture shown. Caution: Read and follow all Use of this Product _p=;. .. Safety Rul,=- _ .._,,,ent for f Utu%_ie_/n_truct_Ons before f_rst Distributed...
SAFETY WARNINGS AND CAUTIONS: • Use appropriate safety equipment when using power and hand tools. Failure to do so may cause personal injury or product damage. • Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injury or product damage.
STEP (3): AA(12) STEP (1): • Attach a angle brace (G) to each side of the legs using (3) bolts (AA)on each. • Finger tighten. BB(6) • While unpacking unit, if you wish, you can leave the workbench top inside the original packaging to prevent the top from being scratched, and complete the assembly steps.
The wax will also help protect the unit against scratches. STEP (6): • Place the workbench in its upright position. • Measure from the right leg 5". • Attach the CRAFTSMAN nameplate (F) on the front rail in this location. Centering the nameplate horizontally on the rail.