Usb-Mouse Installation; Network Connection; Direct Pc Connection Through Crossover Network Cable - EverFocus EPHD08 User Manual

8 channel hd-cctv digital video recorder
Hide thumbs Also See for EPHD08:
Table of Contents

Advertisement

2.5 USB-Mouse installation

Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on)
NOTE: Recommended mouse types are Logitech® and Microsoft® wired USB wheel-mouse. Wireless
USB mouse is not supported.

2.6 NETWORK CONNECTION

This section only describes physical connection to an Ethernet network. This step must be completed
before the DVR can connect to the network. There are two basic types of connection:

2.6.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of
connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a
10/100 Mbps compatible network connection.
Figure 2-1 Direct PC Connection
Pinout of crossover-cable
17

Advertisement

Table of Contents
loading

Table of Contents