Table of Contents
Advertisement
8)
Record: RECORD key for manual start of recording / recording standby (event recording).
LED will be ON if DVR is recording or in record standby.
9)
STOP: STOP key for Playback and Record
10)
BACK: Reverse Playback key
11)
PAUSE: Image freeze in playback mode
12)
PLAY: Playback key
13)
ENTER: Enter Key for menu operation and alarm acknowledge Turn camera audio ON/OFF when
viewing full screen camera. For more details, please refer to Chapter 0.
14)
MENU/ESC: Used to bring up Main Menu or exit from sub-Menus.
15)
SEARCH: The SEARCH key opens the SEARCH menu, details in chapter 3.12 SEARCH.
16)
System LED
POWER: LED indicating power on.
HDD1/2: LED indicating HDD1 / HDD2 active
HDD1: Internal HDDs in DVR
HDD2: External HDDs connected by eSATA port
LAN: LED for network traffic
17)
COPY: The COPY key opens the menu for video data export, details in chapter 3.13 COPY.
18)
JOG/SHUTTLE: Shuttle (outer wheel): In playback mode, use the SHUTTLE for fast forward / fast
Jog
Shuttle
19)
ALARM: LED for alarm status
20)
IR Receiver: Receiver for IR remote control
reverse playback.
JOG (inner wheel): In PAUSE mode, use the jog to move frame by frame. Within
menu functions, use the jog to adjust the values / parameters. Use Jog to highlight
individual cameras.
Use either Shuttle or Jog to switch between MENU parameters.
5
Advertisement
Table of Contents
