Table of Contents
Advertisement
4.3 CAMERA SETTING
Figure 4-2 is a screenshot of the CAMERA SETTING MENU. This menu is used to configure individual
camera settings.
4.3.1 Global Setting
Resolution: Select recording resolution. Choices are: 1920x1080 / 1280x720. The resolution setting is
global, so a change of DVR´s resolution setting requires changing all camera´s resolution.
TV Standard: Select TV Standard from NTSC and PAL.
This setting is related to the camera settings. It is mandatory to set all connected cameras to
same standard as the DVR setting.
The expression "NTSC" and "PAL" are not related to the video standard of the DVR, only to
the used frequencies for synchronisation (PAL:50 Hz, NTSC: 60Hz).
The maximum frame rate depends on the selected system (for details please consult
specifications)
Note: 1. When changing the resolution, a confirmation message will pop up: "Changing the resolution
setting will cause the system for format the hard disks and reboot. Would you like to continue?"
2. Recording frame rate may be affected if changing the TV standard.
3. When loading factory default values, resolution and TV Standard will not change.
Figure 4-2 Camera Menu-Global Setting
44
Advertisement
Table of Contents
