Connection - EverFocus PoleStar EQ550 Operation Instructions Manual

4. CONNECTION

1. Connect the cable from keyboard's RS485 port to camera's RS485 port.
2. Connect the cable from video output jack of the camera to monitor's input jack.
3. RS485 ID of Polestar has to be the same as CAM ID of the keyboard. (Please refer to
"
6.3 How to set RS485 ID & Baud rate?"
4. Baud rate of Polestar has to be the same as Keyboard's baud rate. (Please refer to "
How to set RS485 ID & Baud rate?"
485
for RS485 ID setup detail)
for baud rate setup detail)
- 8 -
6.3