Table of Contents
Advertisement
Table 3-4 Port Filtering Configuration Screen Field Definitions (Continued)
Use this field ...
Filter Using VLAN
Lists (Toggle)
Filter All Untagged
Frames
(Toggle)
3.6.1
Displaying VLAN IDs Associated with a Port
To display the VLAN IDs and VLAN Names of the VLANs associated with a particular port,
proceed as follows:
1. Use the arrow keys to highlight the Port field.
2. Use the SPACE bar or BACKSPACE key to step through the available port selections. The
screen displays the Port VLAN List of the selected Port. If ALL is selected, no VLAN ID or
VLAN Name information is displayed under Port VLAN List.
3. To display additional VLANs that do not display in the current screen display, use the NEXT
or PREVIOUS commands located at the bottom of the screen, as follows:
NOTE: The NEXT and PREVIOUS fields will only display if there are further VLANs in
the list to page through.
4. To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the
entries on the next screen.
5. To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to
view the entries on the previous screen.
To ...
Filter out (drop) frames that are classified, via their VLAN tag, as
belonging to a VLAN that is not on the Port VLAN List and prevent
them from being forwarded by the switch.
This field toggles between YES and NO. YES enables filtering
according to the Port VLAN List. NO allows the switch to forward
the frames. The default is NO.
To filter out all incoming untagged frames so they will not be
forwarded by the switch. This field toggles between YES and NO.
YES enables the filtering of untagged frames. NO allows the switch
to forward untagged frames. The default is NO.
Port Filtering Configuration Screen
VLAN Configuration
3-19
Advertisement
Table of Contents
