Folding Tool Work Stand Down For Storage; Description - Craftsman 320.19730 Operator's Manual

FOLDINGTOOLWORK STAND
DOWN FOR STORAGE
(Refer to Illustration Figso 1 to 15 on pages 9-13)
Once Bench Top Power Tool is removed from Tool Stand;
'_ Keep Caster Wheels in locked position by pushing Locktng Lever"Down%
2, Loosen Tool Stand's Clamping Knobs,,
3 Open up Tabfe Top Assembly to its fully extended size. Ih_n re-lighten Ciamping Knobs
4 Pull back Spring Loaded Locking Pin and remove Supporl Bar lrom Table Top groove.
5 With your foot on the Base Bar, raise Table Top Assembly 1o upright, vedicaf position.
Close up legs of Tool Stand and push down on Chrome Extension Bars unltl fully lowered
6 Lower Table Top Assembly,
7 Use red Locking/Carrytng Handle to join Table Top Assembly and Leg_, together.
8, To roll Work Stand, unlock Caster Wheels by lifting Locking Lever on each wheel
to the "UP" position
J _ WARNING:
BE SURE to read and understand sit Instructions In this
Manual and the Bench Top Tool's Operating Manual before using the tool on this
UnlversatTool Stand. Failure to follow a_l fnstruotlons listed below may result In
electric shock, f)re and/or serious personal Injury.
This UntversalTool Stand wlth new "X-member" lightweight, compact design quickly
folds up and locks into piece for convenient storage.The heavy*duty design can
hold up to 300 Lbs. Steel support brackets add rigidity to the stand,
This UntversalTool Stand has the following features;
1 Lightweight, compact, ergonomlc design, unfolds for easy set-up to a comfodabte
working height of 34-inches off of the floor.
2 "X" frame design has positive locking, telescoping, 1-Inch tubular steel legs
and cross supports for durability and added strength
3 3-inch locking caster wheels and 3 X 2Va-inch skid resistant foot pads help
provide maximum stability with a 18 X 29-inch wide lootpdnl
4 3_way locking system provides maximum stability during use.
5 Sliding steel table top has pro-stamped mounting slots and adjusts and Iocks lrom
t3 V4 to 16 V,_inches to accommodate and secure most brands and sizes of miter
saws..
16