Safety Symbols; Symbol Meaning; Damage Prevention And Information Messages - Craftsman 320.19730 Operator's Manual

1
1
] The purpose of safety symbols is to attract your altention Io possible dangers
t The safety symbols, and tile explanalions with them, deserve your careful
altention and understanding, The symbol warnings DO NOT by lhemsetves
eliminate any danger. The instructions and warnings lhey give are no substitutes
for proper accident prevention measures
t
t Z_ WARNING:
BE SURE to read and understand all safety instructions in
this manual, Including all safety alert symbols such as "DANGER", "WARNING"
and "CAUTION", BEFORE using this tool stand. Failure to follow all instructions
tisted below may result in electric shock, fire and/or serious personal injury_
J
SYMBOL MEANING
,_1 SAFETY ALERT SYMBOL: IndicatesDANGER,WARNING, OR
CAUTION_ May be used in conjunction wl|h oliver symbols or plctographs.
Fatlure to obey this safety warning WILL result in death or
sedous injury to yourself or to others° Always follow the
safety precautions to reduce the risk of ffre, electric shock
and personal Injury.
t f Failure to obey this safety warning CAN result in death or
_WARNtNG
t serious injury to yourself or to others. Always follow the
safety precautions to reduce the risk of fire, electric shock
and personal tnlury.
J
i
[Z_ | Failure to obey this safety warning MAY result In personal
CAUTION
I
injury to yourself or others or property damager Always
follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These _nform user at important Information andtor instructions that couid 10ad to
equipment or other property damage _f not _al_ewed, Each message is preceded by the
word "NOTE:" as tn lhe example below:
NOTE: Equipment and/or property damage may result If these instructions
are not followed.
WEAR YOUR
I
1
t
1
1
z_WARNING: The operation of any bench top tool can
result In foreign objects being thrown Into your eyes,
whtch can result in severe eye damage. Before beginning
power tool operation, ALWAYS wear safety goggles or
safety glasses with side shield and a full-face shield
when needed, We recommend a Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with
side shield, available at Sears Stores or other craftsman
Outlets_