Craftsman 320.19730 Operator's Manual page 11

6,
Fig,, 6
Hold down the Base Bar Legs
(as shown) by placing your foot
on the Base Bar. Pull theTable
Top Assembly straight up until
the Chrome Extension Bars (E),
attached to the Table Top Assembly,
are fully extended° Be sure the
Chrome Extension Bars lock
fn place°
Flgo 7
7, With your foot still on the Base
Bar, take hold of the Support Bar (F)
and pull up until its Chrome
Extenslon Bars are also fully
extended and lock in place Pull the
legs further apart to form an "X",
B, With your foot still on the Base
Bar, lower the Table Top
Assembly onto Support Bar (F)
while making sure that the
Support Bar is placed Into the
Notch (G)_
9 Pull the Spring Loaded
Locking Pin (H) back so that the
Support Bar and Table Top groove
lit together securely, then release
the Spring Loaded Locking Pin
so that the Table Top is locked
into position.
11