Canon VIXIA HF R20 Instruction Manual page 77

-Ifadialog box appeared on the c omputer screen, close it. D isconnect the U SB cable, and
restore the c onnection after ashort while.
Total play time is too l ong
-The story cannot be converted when its t otal playback time exceeds 2hours and 30 minutes.
Reduce the n umber of s cenes to converL
Unableto recognize the data
- Youtransferred data to the camcorder recorded in a different television system (PALor
SECAM).Playback the recordings with the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Saveyour recordings (C[_ 119) and initialize the memory
using the [Complete Initialization] option (_ 41).
Unsupported gallery data detected. Cannot record or edit. Delete gallery data?
- The gallery data on the selected memory is not supported by this camcorder. Playback is pos-
sible but you recording and editing is not. Touch [Yes]to erase the gallery data and enable
recording. If the gallery data is erased,the camcorder that recorded the movies will not be
able to play them back.
USBConnection Donot disconnect the powersource. Cannot write data with this connection.
Towrite data to the oamcorder, connect the compact power adapter then reconnect the
oamoorder and computer. Do not disconnect the USB cable unless you first use the computer
to safely end the connection.
- The oamoordercannot be operatedwhile it is not beingpowered by the compact power
adapter and is connectedto a computer with the supplied USBcable. In addition, scenescan-
not be written back and music files cannot be transferred to the oamoorder.Toavoid corrupt-
ing the data in the camcorder's memory, use the computer's Safely RemoveHardware
function to end the connection and disconnect the USBcable before using the camcorder.
- To be able to write backscenes and to transfer music files to the oamcorder,use the com-
puter's SafelyRemove Hardwarefunction to end the connection,disconnect the USBcable,
power the oamoorderusing the compact power adapter and only then connect it to the com-
puter again.
USBConnection Do not disconnect the power source. Donot disconnect the USBcable unless
you first use the computer to safely end the connection.
- Whenthe camcorder is in _ mode and is connectedto the computer with the supplied
USBcable, the oamoorder cannot be operated. Disconnectingthe USBcable or power source
while this messageappears may result in permanent loss of the recordings in the oamcorder.
Usethe computer's Safely RemoveHardware function to end the connection and disconnect
the USB cable before using the oamcorder.
- To be able to write back scenesand to transfer music files to the oamoorder,power the cam-
corder using the compact power adapter and only then connect it to the computer using the
supplied USBcable.
Addtona kfformat on *
165