Canon VIXIA HF R20 Instruction Manual page 30

Copying Photos from the index Screen
From the index screen, you can copy selected photos or all photos.
Operating modes: ........
1 Open the photo index screen.
After pressing [£F1_]5], s elect the [B tab to copy photos from the built-
in memory (8_}/1]H_8 only) or the [_ tab to copy photos from
memory card [].
2 Select the photos to copy.
[Edit] _ [COPY (I:B '_ _)] (lllJ_ll)_ 0nly ) 0r[c0pY
(_ _ _)] _} Desired Option
if you selected [Select], touch the photos to copy and then touch [OK].
A checkmark ,/will appear on selected photos. Touch a selected
photo again to remove the checkmark. You can also touch [Remove
All] to remove all checkmarks.
3 Touch [Yes] _ [OK].
Touch [Stop] to interrupt the operation while it is in progress.
Options
[Select] Copies all photos that you select.
[All Photos] Copies all photos.
O IMPORTANT
Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
When copying photos onto an Eye-Fi card in memory card slot _], pho-
tos will be uploaded automatically when the camcorder is in playback
mode if you are within the range of a configured network. Always verify
that Eye-Fi cards have been approved in the country/region of use. See
also Using an Eye-Fi card ([_ 131).
118
* External Connect or_s