Canon VIXIA HF R20 Instruction Manual page 20

IMPORTANT
Observe the following precautions while t he ACCESS indicator isonor
flashing. Failing todoso may r esult inpermanent data loss.
- Do not o pen t he double memory card s lot c over.
- Do not d isconnect the power source orturn off t he camcorder.
- Do not c hange the camcorder's operating mode.
After recording photos onanEye-Fi card inmemory card slot _ ],pho-
tos will b euploaded automatically when t he camcorder isinplayback
mode ifyou are within the range ofaconfigured network. Always verify
that Eye-Fi cards have been a pproved inthe country/region ofuse. See
also
U sing an Eye-Fi card (l_ 131).
NOTES
You cannot take photos when _ _ [Frame Rate] is set to
[_ PF30] or [_ PF24]. Also, you cannot take photos when digital
zoom is activated (light blue area on the zoom bar),
Selecting PhotoSize
You can select the size of photos by choosing the aspect ratio. You can
select [_] 2016x1512] or [[r,4J_ 1920x1080]. if you select
[iT,4_31920x1080], the photo will be recorded in a wide aspect ratio.
Operating modes: 1
h [FUNC:] @ [MENU] @ _ @ [Photo AsPect Ratio] @ !
Desired photo size [aSpect ratio) @ ix]
Options
Large capacity memory cards, like those usually used for video record-
ing, can contain a very large number of photos. As a reference, the
number of photos that can be recorded on a 1 GB memory card is 455
for [L_J_ 2016x1512] and 670 for [IT;_J 1920x1080].
108 * Photos