Canon VIXIA HF R20 Instruction Manual page 42

@ _MPORTANT
While the camcorder is connected to the computer, do not open the
double memory card slot cover and do not remove the memory cards.
Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the compact power adapter or turn off the
camcorder or the computer.
_/ST'_m Uploading your Videos Wire[ess[y
If you are using an Eye-Fi card, you can automat(cally upload the mov-
ies from the [m,_SD Movies] index screen to your favorite video sharing
Web site. You will need to have installed the software supplied with
your Eye-Fi card and completed all the required configuration setup in
advance. Refer to the instruction manual of the Eye-F( card.
Please read the IMPORTANT section (C_ 131) before using an Eye-Fi
card.
1 Insert your Eye-Fi card into memory card slot _]m and make sure
there is sufficient available space on the memory card.
2 Convert the desired movies ([_ 1 25).
When the conversion is completed, touch [End Without Connecting].
If you are within the range of a configured network, Web upload will
start automatically.
The status of the wireless communication is shown by the Eye-Fi
icon as follows:
- _" (grayed out) Communication not established
- _" (white, flashing) Connecting; _" (white, continuously on)
Wireless upload on standby
- _" (animated) Wireless upload in progress
_" [Eye-Fi Communication] is set to [[_J_ Off]
- OFF
- "_ Wireless upload stopped by the camcorder (C[_3 157)
- _ Error reading from the Eye-Fi card (C[_3 156)
130 * External Cor_r_ect or_s