Dell PowerEdge 6350 Installation And Troubleshooting Manual page 95

power supply switch
2. Align the front and rear tabs on the power supply with the slots in the chassis and
slide the new power supply into the chassis.
3. Rotate the power supply handle to the closed position and push down on the
handle to ensure that it snaps into place.
The handle activates a power switch that turns on the power supply when the
handle is properly closed.
1. Check the AC power outlet and power cable (see "Checking Connections and
Switches" in Chapter 2).
2. Turn off the system, including any attached peripherals, and disconnect all the AC
power cables from their power sources.
power supply handle
power supply
chassis slots
(one each side)
Checking Inside the Computer 7-11