Dell PowerEdge 6350 Installation And Troubleshooting Manual page 145

This chapter provides instructions for trained service technicians to install one or more
Dell PowerEdge 6350 computers in a Dell rack. The following rack-mounting compo-
nents are included in a kit that comes with the system (see Figure 11-1):
One pair of slide assemblies with mounting brackets
One cable-management arm
Four curved nut plates
One cage-nut installation tool
Fourteen 10-32 x 0.5-inch pan-head Phillips-head screws
Three 10-32 x 0.313-inch pan-head Phillips-head screws
Ten #10 flat metal washers
Six 10-32 cage nuts
NOTES: The nonmetric screws called out in illustrations and procedural steps are
identified first by size and then by the number of threads per inch. For example, a #10
Phillips-head screw with 32 threads per inch is identified as a 10-32 screw.
Rack Installation 11-1