Dell PowerEdge 6350 Installation And Troubleshooting Manual page 114

8-4 Dell PowerEdge 6350 Systems Installation and Troubleshooting Guide
)LJXUH  ([SDQVLRQ&DUG &RQQHFWRUV
Follow this general installation procedure:
1. Turn off the system, including any attached peripherals, and disconnect the sys-
tem from its AC power source.
2. Prepare the expansion card for installation, and open the panel doors on top of
the computer
See the documentation that came with the expansion card for information on
configuring the card, making internal connections, or otherwise customizing the
card for the system.
3. Select the expansion slot in which you will install the new expansion card.
4. Open the plastic expansion card clip and remove the expansion slot filler bracket:
a. Press and hold the plastic tab on the outside of the system chassis (see
Figure 8-4).
b. Press the release tab on the latch inside the system chassis.
c. Open the expansion card latch and remove the filler bracket.
32-bit PCI connectors
(PCI1 [top] through PCI3)
64-bit PCI connectors
(PCI4 [top] through
PCI7)