Panasonic KV-S3105C Operating Instructions Manual page 58

Troubleshooting
LCD
U 2 3 D o u b l e
U 2 4 P o i n t e r
U 3 0 F r o n t
U 3 2 B a c k D o o r
U 3 4 T o p D o o r
U 5 0 N o I / F
H t t C a l l S e r v i c e
F t t C a l l S e r v i c e
"F60 Call Service" and/or "F62 Call Service"
appear on the LCD frequently.
58
F e e d
t t t t t t t t
t t t t t t t t
D o o r O p e n
t t t t t t t t
O p e n
t t t t t t t t
O p e n
t t t t t t t t
B o a r d
t t t t t t t t
t t t t t t t t
t t t t t t t t
Possible Cause
Multiple sheets were fed into
the unit.
When U23 Double
occurs frequently, the rollers
are dirty.
When U23 Double
occurs frequently, the rollers
need to be replaced.
The paper path selector is
set to the lower side when a
post-imprinter is selected.
The front door is open.
The back door is open.
The post-imprinter door is
open.
The interface is not installed
properly.
A user non-serviceable error
has occurred.
A user non-serviceable error
has occurred.
The lamp module reaches its
useful life.
Remedy
Open the front door and remove
the jammed paper.
Feed
Clean all of the rollers. (See
page 38.)
Feed Replace the paper feed roller
module or the retard roller mod-
ule. (See pages 43
Set the paper path selector to
the upper side to select a U-turn
path pass. (See
Close the front door.
Close the back door.
Close the post-imprinter door.
Install the interface board again.
Consult with a service represen-
tative. Call technical support ser-
vice.
Consult with a service represen-
tative. Call technical support ser-
vice.
Replace the lamp module.
Call technical support service.
and 45.)
page 32.)