Replacing Consumables
4
Remove the paper feed roller module
by removing its bearing from the guide
grooves of the chassis in the scanner.
5
Open the optional "Roller Exchange
Kit" (KV-SS026) or "Roller Exchange
Kit for thin paper" (KV-SS027), and
take out the new paper feed roller mod-
ule.
6
Install the new paper feed roller mod-
ule with its gear on the right.
≥ Insert the paper feed roller cover into the
paper feed roller hole before attaching the
bearings into the grooves of the chassis.
(1)
≥ Attach the bearings at both ends of the
paper feed roller module into the guide
grooves of the chassis in the scanner.
(2)
44
Chassis
Bearings
Green levers
Paper feed roller module
Paper feed roller cover
Paper feed roller hole
2
2
1