Panasonic KV-S3105C Operating Instructions Manual page 23

Imprinter setting menu (by pressing the IMPRINT key)
If a post-imprinter is installed, you can set the following conditions.
Number, item and default display
• Pressing the 3 key will change to the next
mode.
• Pressing the 4 key will change to the
previous mode.
11 Setting the post-imprinter data
1 1 . P o s t I m p r i n t
• This setting can be done only when a post-
imprinter is installed.
12 Setting the post-imprinter position
1 2 . P o s t P o s i t i o n
• This setting can be done only when a post-
imprinter is installed.
13 Setting the post-imprinter font style
1 3 . P o s t F o n t
• This setting can be done only when a post-
imprinter is installed.
• Pressing the 1 key or the 2 key will change to another
value.
Host Count
H o s t
Host: Printing will be done according to the host computer.
Count: Printing will be done according to the counter in the
"Select counter displayed on the LCD".
By pressing the 1 key or the 2 key, you can specify the line
where printing starts from the top of the document. If "0"
character is set, printing starts from 10.0 mm.
H o s t
The millimeter value displayed is an approximation.
1 2 . P o s t
<
The length per character varies, depending on the 04
orientation setting.
90° or 270°: 2.38 mm per character
0° or 180°: 3.44 mm per character
Character: 0 - 72
• In this example, printing starts at 12.38 mm (approx. 1/2 in.)
from the top of the paper. The number 12.38 can be
changed from 10.0 to 181.36 by pressing the 1 key or the
2 key.
Top of the paper
10 mm (Default)
Approx.
13/32 in.
Top of the
printout
Host Bold
H o s t
Bold: 2-dots font
Normal: 1-dot font that can increase the ink lifetime longer
than Bold fonts.
Display Panel Instructions
Contents
P o s i t i o n
1 C h a r > 1 2 . 3 m m
Top of the paper
12.38 mm
Approx.
1/2 in.
Top of the
printout
Normal
23