Status Read Command Table; Image Status Read Command Table; Pc Adjust Status Read Command Table; Video Status Read Command Table - Sanyo PLC-WM4500/L - 4500 Lumens Manual

PLC-WM4500/WM4500L Expand Serial Command Functional Specifications
6

Status Read Command Table

6.1

Image Status Read Command Table

Status Read command
CR_BRIGHT [CR]
CR_CONT [CR]
CR_COLOR [CR]
CR_TINT [CR]
CR_SHARP [CR]
CR_GAMMA [CR]
CR_WBAL-R [CR]
CR_WBAL-G [CR]
CR_WBAL-B [CR]
CR_COLTEMP [CR]
CR_OFFSET-R[CR]
CR_OFFSET-G[CR]
CR_OFFSET-B[CR]
CR_NZRED [CR]
CR_PROGV [CR]
CR_IMAGE [CR]
CR_IMGGMD [CR]
6.2

PC Adjust Status Read Command Table

Status Read command
CR_FSYNC [CR]
CR_TDOTS [CR]
CR_CLPPHASE [CR]
CR_H-POS [CR]
CR_V-POS [CR]
CR_DDOTS [CR]
CR_DLINE [CR]
CR_PCSTORE [CR]
6.3

Video Status Read Command Table

Status Read command
CR_SERSYS [CR]
6.4

Input Status Read Command Table

Status Read command
CR_INPUT [CR]
CR_SOURCE [CR]
CR_SRCINP1 [CR]
CR_SRCINP2 [CR]
CR_SRCINP3 [CR]
CR_SYSTEM [CR]
CR_SYSLIST [CR]
CR_MODELIST [CR]
Item
Get value of Brightness
Get value of Contrast
Get value of Color
Get value of Tint
Get value of Sharpness
Get value of Gamma
Get Red value of White Balance
Get Green value of White Balance
Get Blue value of White Balance
Get value of Color temperature
Get Offset Red
Get Offset Green
Get Offset Blue
Get setting status of Noise reduction
Get setting status of Progressive scan
Get Selected Image status
Get setting value of Image Gamma
Item
Get setting value of Fine Sync
Get setting value of Total Dots
Get setting value of Clamp phase
Get setting value of Horizontal Position
Get setting value of Vertical Position
Get setting value of Display Dots
Get setting value of Display Line
Get status Free/ Stored for PC Adj. mode 1-10
Item
Get currently selected signal. In Auto mode, it returns a
result by Auto detection.
Item
Get selected Input
Get selected Source
Get selected source for Input 1
Get selected source for Input 2
Get selected source for Input 3
Get selected system in current Input mode
Get possible system list
Get possible mode list
13/78