Computer Input; Input Source Selection (Computer 1: Rgb) - Sanyo PLC-WL2503A Owner's Manual

Computer Input

Direct Operation
Choose Computer 1(RGB) by pressing the COMPUTER 1
button on the remote control or press the INPUT button on
the top control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Top Control
INPUT button
COMPUTER 2 can not be selected when using the
*
COMPUTER IN 2/ MONITOR OUT terminal as MONITOR
OUT output.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲
then press the Point
2
Use the Point ▲
3
When Computer 1 is selected, press the Point
access the submenu items. Use the Point ▲
to select the RGB input source and then press the
SELECT button.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.45).

Input Source Selection (Computer 1: RGB)

Computer 1
Computer 2 *
HDMI
Video
S-video
buttons to select Input and
▼
or the SELECT button.
►
buttons to select Computer 1.
▼
Remote Control
Computer 1(RGB)
Computer 1(Scart)
Input Menu
to
►
buttons
▼
Computer
1
HDMI
COMPUTER 1 button
ASPECT
27