Screen Size Adjustment - Sanyo PLC-WL2503A Owner's Manual

Store
To store the adjusted data, select Store and press the Point
or the SELECT button. Use the Point ▲▼ buttons to
►
select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1-4) in the
Image Mode Selection on page 33.

Screen Size Adjustment

This projector has the picture screen resize function, which
enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Screen and
then press the Point ► or the SELECT button.
2
Use the Point ▲▼ buttons select the desired item and
then press the SELECT button .
Normal
Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1280 x 800), the
projector automatically switches to the panning mode. Use
the Point buttons to pan the image. When adjusted,
◄►▲▼
the arrows turn red. When reached to the correction limit,
the arrows disappear.
Full
Provide the full screen image.
Custom
Provide the last stored aspect screen image.
Note:
• T his projector can not display any resolution higher than 1920 x 1200. If your computer's resolution is higher
than that, lower the resolution before connecting to the projector.
• T he image data other than 1280 x 800 is modified to fit the screen size in initial mode.
• T rue and Digital zoom +/- are not available when the 4:3 or 16:9 function is selected in the Screen aspect (p.50).
• T rue, Full, and Digital zoom +/– can not be selected when 480i, 575i, 480p, or 575p is selected in the PC
System Menu (p.29).
Store Menu
A confirmation box appears and
then select yes .
Screen Menu
Computer Input
35