Focus Adjustment; Auto Setup Function; Keystone Correction; Top Control - Sanyo PLC-WL2503A Owner's Manual

Owner's manual

Hide thumbs Also See for PLC-WL2503A:

Owner's manual (59 pages)

Specifications (1 page)

Service manual (104 pages)

Table Of Contents

Table of Contents

Adjust the lens focus with the focus lever.

Auto setup function is provided to automatically execute

the setting of Auto setup (includes Input search and Auto

PC adj. functions) in the Setting Menu by just pressing the

AUTO SET button on the remote control. Refer to page 45

for the setting of the Auto setup function.

Note:

Fine sync, Total dots, Horizontal and Vertical position

of some computers can not be fully adjusted with the Auto

PC adjustment function. When the image is not provided

properly with this operation, manual adjustments are

required. (pp.31-32)

Press the KEYSTONE button on the remote control or on

the top control. The Keystone dialog box appears. Use

the Point

buttons to correct keystone distortion. The

▲▼

keystone adjustment can be stored (see page 46).

Reduce the upper width

with the Point

button.

▲

• The white arrows indicate that there is no correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the remote

control or on the top control once more while the

keystone dialog box is being displayed, the keystone

adjustment will be canceled.

• The adjustable range is limited depending on the

input signal.