Ariens 915137-2042 Zoom XL Owner's/Operator's Manual page 26

PTO or
mower
blades do
not engage
or shuts off.
Engine
overheats.
Unit moves
with engine
off and
parking
brake
engaged.
Hour meter
continues
when
engine not
running.
Unit does
not travel in
a straight
line.
Unit creeps
with
steering
levers in
neutral
position.
1. 1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
1.
2.
3.
Operator presence
switch not
depressed.
Faulty operator
presence switch.
Electric clutch
connector is loose
or disconnected.
Faulty PTO belt.
Faulty PTO switch,
wires, connectors,
or clutch.
Engine oil level
low.
Cooling system
plugged.
Faulty engine.
The parking brake
needs adjustment.
Faulty parking
brake.
Ignition key is in
the run position
with engine turned
off.
Incorrect tire
pressure.
Steering levers
need adjustment.
Hydrostatic
transmission
and/or linkage
needs adjustment.
Hydrostatic
transmission
and/or linkage
needs adjustment.
2.
3.
4.
5.
1.
2.
3.
1.
2.
Depress operator presence switch by
sitting on seat.
Contact your Ariens Dealer.
Connect the electric clutch connector.
See REPLACING HYDROSTATIC BELT
on page 22 for the electric clutch
connector location.
Replace PTO belt (see REPLACING
PTO BELTon page 22).
Contact your Ariens Dealer.
Add engine oil. Refer to Engine Manual
for detailed instructions.
Clean cooling system. Refer to Engine
Manual for detailed instructions.
Contact your Ariens Dealer.
Contact your Ariens Dealer.
Contact your Ariens Dealer.
1. Turn ignition key to the off position.
1.
2.
3.
Check tire pressure (see
SPECIFICATIONS on page 28)
Adjust steering levers (see Forward and
Reverse Speed Adjustment on page 21 )
Contact your Ariens Dealer.
1. Contact yourAriens Dealer.
GB - 26