Advertisement
Check that your PC and projector are turned off.
Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI
cable (Not supplied).
- When connecting to the HDMI terminal of your PC, use an HDMI cable (Not supplied).
- For the supported input signals, refer to
"PC
Timing(D-Sub/HDMI)".
Connect the [PC 1/DVI AUDIO IN] terminal of the projector and the Audio out terminal of your PC using an audio cable (Not
supplied).
- If connecting with an HDMI/HDMI cable, an audio cable (Not supplied) is not needed.
Connecting an External Monitor
You can view an image on both your projector and a separate monitor at the same time.
Check that your PC and projector are turned off.
Advertisement
