Advertisement
<Display Properties> tab will appear.
2.
Click on [Settings] tab and set the <Screen resolution> by
referring to <Resolution> described in
supported
by this projector.
You do not have to change <Color quality> setup.
3.
Press the [Advanced] button.
Another property window will appear.
4.
Click on [Monitor] tab and set the <Screen refresh rate> by referring
to <Vertical Frequency> described in
Resolution/Size Modes
table.
5.
Click the [OK] button to close the window, and click the
[OK] button of the <Display Properties> window to close the
window.
The computer may restart automatically.
6.
Shut down the PC and connect to the projector.
Process might vary depending on your type of computer or Windows versions.
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)
This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor.
Projected images may differ from the monitor depending on monitor manufacturer or Windows versions.
When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not,
there may be signal problems.
the display mode table
the Supported
Advertisement
