Advertisement
1) Balance
2) 100Hz
3) 300Hz
Filter Check
Sets the check period for the filter. (Unit: hour)
Time
1) Off
2) 100
3) 200
4) 400
5) 800
▶
If the filter usage time is larger than the filter check period, the filter check
message is displayed for a minute whenever the projector is turned on.
Filter check message: "Check the filter, and if necessary, clean or replace it.".
▶
Auto Power On
If the power is supplied to the projector, it is turned on automatically without pressing the
Power button.
1) Off
2) On
Sleep Timer
If there is no input signal for the specified time, the projector is turned off automatically.
(But, for the specified time, there must be no button input from the remote control or the top
of the projector)
1) Off
2) 10 min
3) 20 min
4) 30 min
Information
You can check external source signals, picture setup, PC picture adjustment and lamp use
time.
4) 1kHz
5) 3kHz
6) 10kHz
Advertisement
