Yamaha PSR-S950 Owner's Manual page 87

3
Use the TAB [E][F] buttons to call up the desired page.
For details about each display Page, refer to the Reference Manual on the
website.
• VOL/VOICE: Changes the Voice for each part and adjusts panning and vol-
ume for each part.
• FILTER:
Adjusts the Harmonic Content (resonance) and sound bright-
ness.
• TUNE: Pitch-related settings (tuning, transpose, etc.).
• EFFECT: Selects the effect type and adjusts the effect depth for each
part.
• EQ:
Adjusts equalization parameters to correct the tone or timbre
of the sound.
4
Use the [A] – [J] buttons to select a parameter, then use the
[1 ] – [8 ] buttons to set the value for each part.
5
Save your MIXING CONSOLE settings.
• To save the PANEL display settings:
Register them to Registration Memory (page 79).
• To save the STYLE display settings:
Save them as Style data.
1. Call up the operation display.

[FUNCTION]
2. Press the [EXIT] button to close the REC CHANNEL display.
3. Press the [I] (SAVE) button to call up the Style Selection display for sav-
ing your data, then save it (page 26).
• To save the SONG display settings:
First register the edited settings as part of the Song data (SETUP), then save the
Song.
1. Call up the operation display.

[FUNCTION]
2. Use the TAB [E][F] buttons to select the CHANNEL Page.
3. Use the [A]/[B] buttons to select "SETUP."
4. Press the [D] (EXECUTE) button.
5. Press the [I] button to call up the Song Selection display for saving your
data, then save it (page 26).
Advanced Features
Refer to the Reference Manual on the website, Chapter 9.
Editing VOL/VOICE parameters:
Editing FILTER parameters:
Editing TUNE parameters:
Changing an Effect type:
Editing EQ parameters:
[F] DIGITAL REC MENU
[F] DIGITAL REC MENU

[B] STYLE CREATOR

[A] SONG CREATOR
[MIXING CONSOLE]  TAB [E][F] VOL/VOICE
[MIXING CONSOLE]  TAB [E][F] FILTER
[MIXING CONSOLE]  TAB [E][F] TUNE
[MIXING CONSOLE]  TAB [E][F] EFFECT  [F] TYPE
[MIXING CONSOLE]  TAB [E][F] EQ
PSR-S950/S750 Owner's Manual
NOTE
If you simultaneously hold down one
of the [A] – [J] buttons and use the
[1 ] – [8 ] buttons (or the
DATA ENTRY dial), you can instantly
set the same parameter value to all
other parts.
87
9