Expanding Voices - Yamaha PSR-S950 Owner's Manual

Expanding Voices

Installing an Expansion Pack lets you add a variety of optional Voices and Styles to each Expansion category. The
installed Voices and Styles can be selected like Preset Voices and Styles, allowing you to expand your music
performance and creation possibilities.
For information on obtaining Expansion Packs, refer to the PSR-S950 or PSR-S750 page at the Yamaha website
(http://www.yamaha.com/). Depending on your locale, Expansion Packs may be available for expanding Voices and
Styles unique or native to your particular area.
Installing an Expansion Pack
1
Connect the USB flash memory which contains the Expansion
Pack file to the [USB TO DEVICE] terminal of the instrument.
2
Call up the operation display.
[FUNCTION]  [J] EXPANSION PACK INSTALLATION  TAB [E][F]
USB
3
Use the [A] – [J] buttons to select the desired Expansion Pack
file.
4
Press the [6 ] (INSTALL) button to install the data to the
instrument.
Follow the on-display instructions.
5
Press the [F] (YES) button when the message indicating
completion of the install operation appears.
The instrument will be restarted automatically.
6
Press the [EXPANSION/USER] button in the VOICE or STYLE
category selection buttons to see if the Expansion Pack data
has been installed successfully.
Expansion Voices or Styles can be found in the Expansion folder of the USER
tab display.
36
PSR-S950/S750 Owner's Manual
4
NOTICE
This instrument allows you to
install only one Expansion Pack.
Installing an Expansion Pack will
erase all the previously existing
Expansion Pack data in the
instrument. Make sure to keep a
copy of the Expansion Pack data
in a USB flash memory for future
use.
NOTE
Before using a USB flash memory, be
sure to read "Connecting a USB Flash
Memory" on page 92.
NOTE
You can call up the information for the
selected Expansion Pack by pressing
the [7 ] (INFO.) button. To close the
information display, press the [EXIT]
button.
NOTICE
The instrument will be restarted
when installation is completed.
Save all the data currently being
edited beforehand, otherwise
the data will be lost.
NOTE
If a message appears indicating that
the drive does not have enough free
space, move the files in the USER tab
to the USB tab, then try installing
again. Refer to page 28 for details on
the Move operations.