Starting Up; Turning The Power On And Playing The Keyboard - Yamaha PSR-S950 Owner's Manual

Starting Up

Turning the Power On and Playing the Keyboard

1
Connect the power adaptor.
First connect one end of the AC cable to the power adaptor, then connect the power adaptor's DC plug to the
instrument's DC IN jack on the rear panel. Finally, connect the other end (normal AC plug) to the electrical
outlet.
1-1
Power adaptor
WARNING
Use the specified adaptor (page 100) only. The use of an incompatible adaptor may cause irreparable damage to the PSR-S950/S750, and
may even pose a serious shock hazard! ALWAYS UNPLUG THE AC POWER ADAPTOR FROM THE AC OUTLET WHEN THE PSR-S950/S750 IS
NOT IN USE.
2
Press the [ ] (Standby/On) switch to turn the power on.
The main display appears.
3
While playing the keyboard, use the [MASTER VOLUME] dial to adjust the volume to an
appropriate level.
NEXT PAGE
14
PSR-S950/S750 Owner's Manual
1-2
AC cable
1-3
The shape of the plug and
DC plug
outlet differs depending on
locale.
NOTE
Before the main display appears, turn-
ing the power off, operating the but-
tons and playing the keyboard cannot
be done.