. .
. .
. .
. .
Setting Up the Device
. .
Introduction
To effectively use PC*MILER|Mobile in your vehicle, you should:
•
Change phone settings for best in-vehicle use before you first run
PC*MILER|Mobile
•
Place your phone as close to the windshield as possible
•
Power your phone from the vehicle
Phone Settings
Following are suggested changes to your phone's settings to make
PC*MILER|Mobile easier to use when driving.
Speaker Volume
PC*MILER|Mobile provides you with both audio and visual directions when
navigating to your destination.
If you are not using a headset with your phone, your phone's speakerphone should be
on in order to hear audio directions. If your speakerphone is turned off, you will see
an icon at the top of your screen showing a speaker with a line through it.
To check the status of your speakerphone, power up your phone and check the
speaker icon. If it has a red line through it, press the speakerphone button on the top
left side of your phone (a speaker icon is on the button). A message briefly displays',
indicating the speaker is on. The speaker icon on the screen no longer displays a red
line through it.
To set your initial speakerphone volume high enough for directions to be heard under
most road conditions, from the Nextel screen, press the Menu button. Scroll to
Settings and press the OK button. Highlight Volume and press the OK button.
Highlight Speaker and press the OK button. On the Speaker screen, repeatedly press
the right arrow of the 4-way navigation key until the volume setting is at
Then press the OK button to return to the Volume screen. Press the button under
Back to return to the Settings screen, and then press the button under Back to return
to the Nextel screen.
Display Contrast
To best see the phone's screen in all lighting conditions, you may want to increase
the screen's contrast setting. From the Nextel screen, press the Menu button. Scroll
to Settings and press the OK button. Highlight Display/Info and press the OK button.
PC*MILER|Mobile User's Guide
4
or
5
.
12